FHA Loan Limit Checker 2026
Working
Pick your state and county to see the 2026 FHA loan limit for one, two, three and four-unit homes. In real terms, the limits come from the county limits file published by the U.S. Department of Housing and Urban Development (HUD) — the same file HUD’s own lookup reads. Most counties sit at the national floor of $541,287 for a one-unit home; high-cost counties go up to $1,249,125, and Alaska, Hawaii, Guam and the Virgin Islands have a higher ceiling still.
What this checker does
This checker looks up the maximum FHA-insured loan for a county. In real terms, the Federal Housing Administration sets a different limit for each county, using local home prices, so the amount you can borrow with an FHA loan depends on where the home is. Enter the state and county and you get the limit for a one-unit home — a single-family house — and for two, three and four-unit properties, which have higher limits. The figures are the 2026 limits from HUD’s published county file. Day to day, the checker doesn't decide whether you qualify for an FHA loan, it doesn't estimate your monthly payment or your interest rate, and it is not a loan offer. Use it to find out whether the home you want is inside the FHA limit for its county before you talk to a lender.
How FHA loan limits work
FHA loan limits are set under the National Housing Act, using median house prices. HUD publishes a new set of limits for each calendar year, and the limits apply by metropolitan area and county. In real terms, the limit in your county is the one that matters: a home in a high-cost county can carry a much larger FHA loan than a similar home in a low-cost county.
The national floor and ceiling
Every county’s limit sits between a national floor and a national ceiling. Both are tied to the national conforming loan limit of $832,750 set by the Federal Housing Finance Agency for 2026. The floor is 65 percent of that figure and the ceiling is 150 percent. By number of units, the 2026 floor and ceiling are: one-unit, $541,287 and $1,249,125; two-unit, $693,050 and $1,599,375; three-unit, $837,700 and $1,933,200; four-unit, $1,041,125 and $2,402,625.
How HUD sets a county’s limit
HUD works from the median house price in each area. A county at or below the level that produces the floor stays at the floor. In areas where median prices are higher, the limit rises in step with the median price, up to the ceiling. Where several counties share a metropolitan area, HUD uses the county with the highest median price in that area, so counties in the same metro area usually share a limit. HUD updates the limits each year, and a limit can move up or down if local prices move. If a local government or interested party believes the median price HUD used is wrong, FHA allows an appeal for a local increase under Handbook 4000.1.
Special exception areas
Alaska, Hawaii, Guam and the Virgin Islands have higher construction costs, so FHA gives them a higher ceiling: one-unit $1,873,625; two-unit $2,399,050; three-unit $2,899,800; four-unit $3,603,925. A county in one of these areas can therefore have a limit above the standard national ceiling of $1,249,125 — Maui County and Kalawao County in Hawaii, for example, are at $1,299,500 for a one-unit home in 2026.
How to use the checker
Choose the state first, then the county. The county list is the full list of counties and county equivalents HUD publishes for that state — all 50 states, the District of Columbia and the U.S. territories are covered. Press the button and you'll see the four limits, whether the county is at the standard floor or a high-cost limit, and the area median price HUD used where the limit is above the floor. Two notes on names: in Connecticut the list shows the state’s nine planning regions, which the Census Bureau adopted as county equivalents in 2022 in place of the old eight counties; and in Puerto Rico the entries are municipios, the island’s county equivalents. If you can't find your county, check the spelling against the HUD loan limit lookup linked below — county names follow the official FIPS list.
What the limit means for your loan
The limit caps the base loan amount — the amount you borrow before the upfront mortgage insurance premium is added. It is not a cap on the home price: if the home costs more than the limit, you can still use an FHA loan by putting down enough cash to bring the loan within the limit. The upfront premium of 1.75 percent of the base loan can be financed into the loan on top of the limit, so the total loan on your paperwork can sit slightly above the limit. The limit says nothing about whether you'll be approved, what rate you will get, or what your monthly payment will be — those depend on your credit, income, debts and the lender. If the loan you need is above your county’s limit, the usual options are a larger down payment, a conventional loan, or a different home. The FHA loan calculator on this site works out the monthly payment once you know the loan amount fits inside the limit.
Worked examples
Los Angeles County, California, is at the ceiling: $1,249,125 for one unit, $1,599,375 for two, $1,933,200 for three and $2,402,625 for four. Cook County, Illinois, is at the floor: $541,287 for one unit, $693,050 for two, $837,700 for three and $1,041,125 for four. San Diego County, California, sits between the two: $1,104,000 for one unit, $1,413,350 for two, $1,708,400 for three and $2,123,100 for four. Maui County, Hawaii, is above the standard ceiling at $1,299,500 for one unit — Hawaii is a special exception area, so its ceiling is $1,873,625 rather than $1,249,125. In practice, the same $1,299,500 applies to Kalawao County, Hawaii, the smallest county equivalent in the file.
Common questions
What is the FHA loan limit?
It is the largest loan the Federal Housing Administration will insure in a county. The limit is set for each county from local median home prices, and it rises with the number of units in the property. For 2026 the national floor for a one-unit home is $541,287 and the national ceiling is $1,249,125.
Does the limit include my down payment?
No. The limit applies to the loan amount, not the price of the home. Your down payment is separate: a $600,000 home with a $541,287 limit needs at least $58,713 down for the loan to fit inside the limit, before closing costs.
Why is my county at the floor while a nearby county is higher?
Limits follow median home prices by metropolitan area and county. If your county’s median price is at or below the level that produces the floor, the limit stays at the floor, even when a neighboring county in a different metro area has higher prices. Counties in the same metro area usually share a limit, because HUD uses the highest median price in the area.
Do FHA loan limits change every year?
Yes. HUD publishes new limits for each calendar year, usually in December, and they take effect for case numbers assigned on or after January 1. The limits on this page are the 2026 limits. If you're buying in a later year, check the current year’s file.
What happens if the loan I need is above my county’s limit?
An FHA loan cannot cover the amount above the limit. You can put down more cash to bring the loan inside the limit, look at a conventional loan, or consider a lower-priced home. A lender’s Loan Estimate will show which option fits.
Where does this checker get its figures?
From HUD’s own data: the CY2026 FHA forward limits file published through HUD’s CHUMS data files, read directly in November 2026, and HUD Mortgagee Letter 2025-23, which sets the 2026 floor, ceiling and special exception limits. County names follow the Census Bureau’s FIPS county list. You can check any county against HUD’s own loan limit lookup, linked below.
Where the figures come from
Source
The limits come from two HUD publications. HUD Mortgagee Letter 2025-23 (December 11, 2025) sets the 2026 nationwide floor, ceiling and special exception limits and states they apply to case numbers assigned on or after January 1, 2026. The county-by-county figures come from HUD’s CY2026 FHA Forward Limits file, the downloadable text file published through HUD’s CHUMS data files, retrieved on November 10, 2026. County names follow the U.S. Census Bureau’s FIPS county list, with thirteen names taken from later official changes: Connecticut’s nine planning regions (adopted as county equivalents by the Census Bureau in June 2022), the Chugach, Copper River and Kusilvak census areas in Alaska (2015–2019 changes), and Oglala Lakota County in South Dakota (renamed from Shannon County in 2015). Check any county in HUD’s own lookup: FHA mortgage limits lookup. The letter itself: HUD Mortgagee Letter 2025-23 (PDF).
Limitations
This checker covers forward FHA mortgages under Title II only. It does not cover reverse mortgages (HECMs), which have their own limits, and it does not check FHA eligibility, credit, income or debt. The limits shown are the 2026 limits for case numbers assigned on or after January 1, 2026; HUD can revise a county’s limit on appeal, so confirm the figure with the HUD lookup or your lender before you rely on it. Median prices shown are the values HUD used to calculate the limit, and HUD itself notes they may not represent actual home prices in the county. This tool is not financial advice and is not a loan offer.
Related guides
- FHA Loan Calculator
- FHA Loan Down Payment Assistance
- First-Time Homebuyer Programs
- USDA vs FHA vs VA Loan: Which One Fits Your Situation
- Down Payment Calculator
- Mortgage Payment Calculator
- VA Home Loan Calculator
- USDA Loan Calculator
- Section 184 Indian Home Loan: How the HUD Guarantee Works
- Dependent Care FSA Limit 2026: The $7,500 Limit
- USDA Income Limits by County and Household Size
- Adoption Assistance: Monthly Payments, Medicaid