Electricity Cost Calculator
Working
Estimate a monthly, annual and daily electricity cost from the kilowatt-hours you use and the price per kWh on your bill. No rate is assumed.
How this is calculated
Monthly cost = kilowatt-hours used × price per kilowatt-hour. Annual cost = monthly cost × 12. Daily cost = monthly cost ÷ 30.
Source
Standard multiplication (energy.gov). The usage and the rate are entered by you; no rate is assumed.
Limitations
What you get is an estimate from the usage and rate you put in. It doesn't include fixed monthly charges, taxes, fees or tiered pricing unless you include them in the rate, and actual usage varies by month.
What each input means
Electricity used per month (kWh). The number of kilowatt-hours you used in a month, from your electricity bill or your meter. In practice, a kilowatt-hour is the unit electricity is sold in: a 1,000-watt appliance running for one hour uses one kilowatt-hour. Use a real month's figure from a bill rather than a guess — usage varies a lot between summer and winter, so a January figure won't describe July.
Price per kWh. What your supplier charges per kilowatt-hour, in dollars, from your bill. No rate is assumed, because rates differ by supplier, by state and by plan. The figure to use is the per-kWh charge on the bill — not the total bill divided by the usage, which would fold fixed charges into the rate and overstate it.
How to read your result
The result has three parts: monthly cost, annual cost and daily cost. Monthly cost is the usage multiplied by the price per kWh. Annual cost is the monthly cost multiplied by 12. Daily cost is the monthly cost divided by 30. In practice, all three describe the same usage and rate — they are the same figure expressed over different periods, not three separate estimates.
Read the monthly figure as the cost of the energy itself, not the whole bill. The result does not include fixed monthly charges, taxes, fees or tiered pricing unless you include them in the rate, and actual usage varies by month — so a bill based on a high-usage month will be higher than this figure, and a bill based on a low-usage month will be lower.
The most useful comparison is between two rates or two usage levels. If a different plan charges less per kWh, multiply the saving per kWh by your monthly usage to see the monthly saving; if a new appliance uses fewer kilowatt-hours, multiply the saving in kilowatt-hours by your rate. The calculator is a way of turning those two numbers into dollars.
Comparing months is the other useful habit. Run the calculator for a summer month and a winter month from the bills, and the difference shows how much of the bill is seasonal — heating and cooling, mainly — against how much is steady all year. In practice, the steady part is the base load of the home: refrigeration, lighting, electronics left on, and anything else that runs every month. Cutting the steady part saves money in every month of the year, while cutting a seasonal peak saves money only in that season — so the base load is usually the better place to start looking.
Worked example
Usage 650 kWh in a month at $0.17 per kWh. Monthly cost = 650 × $0.17 = $110.50. Annual cost = $110.50 × 12 = $1,326.00. Daily cost = $110.50 ÷ 30 = $3.68.
Now suppose usage rises to 800 kWh in a summer month at the same rate: monthly cost = 800 × $0.17 = $136.00, which is $25.50 more for the month. And suppose the rate falls to $0.14 per kWh at the original 650 kWh: monthly cost = 650 × $0.14 = $91.00, a saving of $19.50 a month, or $234.00 over a year at the same usage.
Common questions
Where do I find my usage and rate?
On your electricity bill. Usage is shown in kilowatt-hours, usually for the billing month, and the per-kWh price is shown as the energy charge. If the bill shows several lines, use the energy charge per kWh, not the total divided by the usage.
Why is my real bill higher than the result?
Because the result covers the energy charge only. Fixed monthly charges, taxes, fees and tiered pricing aren't included unless you fold them into the rate — and usage in the billed month may be higher than the month you entered.
Does this include tiered pricing?
Not unless you include it in the rate you put in. If your supplier charges different rates for different blocks of usage, a single rate can't describe the bill exactly — use the rate that applies to most of your usage, and treat the result as an approximation.
How do I estimate usage for an appliance?
Multiply its power in watts by the hours you run it, then divide by 1,000 to get kilowatt-hours. Day to day, a 100-watt light run for 10 hours uses 1 kilowatt-hour; a 1,500-watt heater run for 10 hours uses 15.
Can I use this to compare two electricity plans?
Yes. Put in your monthly usage with each plan's per-kWh price and compare the monthly results. Remember to check the fixed monthly charge separately, since a plan with a lower rate and a higher fixed charge can cost more overall at low usage.