Why Do Coins Have Ridges?

Coins have ridges — called a reeded edge — because thieves used to shave precious metal off the rims. When coins were made of silver and gold, a criminal could trim a little metal from the edge of each coin, spend the lighter coin at full value, and melt down the shavings for profit. That trick was called coin clipping, and it was common enough in the 1600s to damage whole currencies. Ridges made clipping obvious: a shaved coin lost its milling, and anyone could see it had been tampered with. Modern coins no longer contain precious metal, but the ridges stayed — for tradition, for security, and because they help you tell coins apart by touch.

A pile of gold coins, the kind whose edges were once shaved by clippers
Photo: Flickr, CC BY 2.0

Coin clipping: the crime that created the ridges

For as long as coins were made from precious metal, clipping was an easy crime. A clipper would shave a tiny amount of silver or gold from around the rim of many coins, collect the shavings, and sell the metal — while spending the clipped coins as if nothing had happened. Done carefully, a coin could lose enough metal to be profitable without looking noticeably smaller or lighter. Multiplied across hundreds of coins, it added up to real money, and it quietly drained value from the currency: every clipped coin in circulation was worth less than its face value in metal.

The problem was worst with hand-struck coins, which were already irregular in shape, so a slightly smaller coin did not stand out. As coins became a bigger part of everyday trade in the 1600s, clipping became a serious threat to trust in money itself. If people could not tell whether a coin was whole, they discounted all coins — and a currency people do not trust stops working.

The fix: milled edges, and Isaac Newton

The answer was to put a pattern on the edge of the coin that tampering would destroy. Ridges — called reeding in the United States and milling in Britain — were added to coins in England in the 17th century. A clipped coin lost its ridges along the shaved section, so the damage was visible at a glance. The idea is often credited in part to Sir Isaac Newton, who became Warden of the Royal Mint in 1696 and pushed milled edges, among other measures, to fight clippers and counterfeiters. Newton took the job seriously — he investigated counterfeiting cases personally — and the milled edge became a standard part of British coinage.

The idea crossed the Atlantic with the United States Mint, which began producing coins in 1792 under the Coinage Act of 1792. Reeded edges appeared on early American silver and gold coins — half dimes, dimes, and quarters struck in mostly silver, and gold quarter eagles, half eagles, and eagles — for the same reason: to make it obvious if anyone had filed metal off the rim.

Why only some coins have ridges

Look at the change in your pocket: dimes, quarters, half dollars, and some dollar coins have ridged edges, while pennies and nickels are smooth. The reason is what the coins were made of. Silver and gold coins were worth clipping, so they got reeded edges. Pennies and nickels were made of cheap base metals — copper, zinc, and nickel — that were never valuable enough to make clipping worthwhile, so the extra cost of milling their edges was not worth paying.

That logic still holds in a different way today. Even though dimes and quarters are no longer silver, they are the higher-value coins in everyday use, and the ridges still serve a purpose: they make counterfeiting harder, because a forger has to reproduce the edge as well as the two faces, and they give each coin a finished look and feel. The United States Mint still specifies reeding counts for its coins — a dime, for example, has 118 reeds.

Why the ridges survived the end of silver coins

The Coinage Act of 1965 removed silver from dimes, quarters, and half dollars, as silver became too expensive for everyday coinage. Clipping stopped being a threat overnight — there was no precious metal left to steal. But the ridges stayed, for several practical reasons. The Mint already had the dies and collars that produced reeded edges, and changing them would have cost money for no benefit. The ridges also kept doing useful work: they make coins easier to tell apart by touch, which matters for people with low vision, and they still add a layer of difficulty for counterfeiters.

How are the ridges made? During striking, the coin blank sits inside a steel ring called a collar die, which surrounds the blank as the obverse and reverse dies come together with great force. The collar carries the reeding pattern, and metal from the blank flows into its grooves, forming the ridges around the edge at the same moment the faces are struck. It is one step in a single strike, which is why reeding is cheap to keep and hard to fake well.

Ridges on coins today

Modern circulating coins keep their reeding mostly out of tradition and continuity — the design is familiar, the tooling exists, and the edge still helps with identification and security. On bullion coins — gold and silver coins sold for their metal value, like the American Gold Eagle — reeding still does its original job: it protects the edge of a coin whose metal is genuinely valuable, and modern versions add security features, such as a deliberately missing reed, to help authenticate the coin. So the ridges on your quarter are a small piece of 17th-century crime prevention, still in use centuries after the crime itself disappeared.

Frequently asked questions

What are the ridges on a coin called?

A reeded edge, or reeding, in the United States — and a milled edge, or milling, in Britain. The ridges are the small vertical grooves around the rim of the coin.

Why do dimes and quarters have ridges but pennies do not?

Dimes and quarters were once made of silver, which was valuable enough to steal by shaving the edges, so they got reeded edges to make tampering visible. Pennies and nickels were made of cheap base metals that were never worth clipping, so they stayed smooth.

How many ridges does a dime have?

A dime has 118 reeds, according to the United States Mint's specifications. The exact count varies by denomination.

Who invented ridged coin edges?

Ridges were introduced on British coinage in the 17th century to fight coin clipping. Sir Isaac Newton, as Warden of the Royal Mint from 1696, promoted milled edges as part of his campaign against clippers and counterfeiters.

Do coins still need ridges today?

Not for their original purpose — modern circulating coins contain no precious metal worth stealing. The ridges remain for tradition, to make counterfeiting harder, and to help people tell coins apart by touch. On gold and silver bullion coins, reeding still protects valuable metal.

Sources

Related guides

Related tools