How Long Does an MRI Take?
Most MRI scans take 30 to 60 minutes inside the machine, and the whole appointment takes about 90 minutes to two hours from arrival to departure. The Mayo Clinic puts the range wider: an MRI exam can last anywhere from 15 minutes to more than an hour, with most people in the scanner for 30 to 50 minutes depending on the images needed. A simple scan of one joint can be done in 20 minutes; a detailed brain study with contrast can run past an hour. Your appointment letter has the best estimate for your scan, because the protocol is set for your specific case. It is part of our Healthcare hub.

The short answer
An MRI is not one photograph. It is a series of imaging runs called sequences, each lasting roughly two to eight minutes, with brief pauses between them. The total depends on how many sequences your doctor ordered, which body part is being imaged, and whether contrast dye is used. At the Mayo Clinic, the routine appointment time is 45 minutes, though some exams can take as long as four hours for complex cases.
The scan time is only part of the visit. Check-in, a safety screening about metal in or on your body, changing into a gown, and positioning on the table all happen before the first image, and they add 30 minutes or more. Plan for 90 minutes to two hours door to door for a routine scan, and longer if contrast is involved.
MRI times by body part
These are typical scan times reported by imaging centers. Protocols differ between centers, so your appointment letter is the final word.
| Body area | Typical scan time | What changes it |
|---|---|---|
| Brain | 30-45 minutes (up to 60 with contrast) | Contrast, detailed protocols, follow-up vs first study |
| Spine (one region) | 20-30 minutes | Number of regions; cervical, thoracic, and lumbar each add time |
| Knee or shoulder | 30-45 minutes | Contrast, injury vs routine follow-up |
| Abdomen or pelvis | 45-60 minutes or more | Breathing instructions, contrast, organ detail |
| Heart (cardiac MRI) | 60 minutes or more | Heart rhythm, contrast, functional imaging |
| Whole-body or multi-region | 60-90 minutes or more | Number of areas scanned in one session |
Children's hospitals publish shorter standard times for some studies — a brain MRI without contrast at 15 to 20 minutes, for example — because pediatric protocols are streamlined and children are often scanned with faster sequences. Adult times run longer because the protocols ask more questions of the images.
What makes an MRI take longer
- Contrast dye. When the order says with and without contrast, the team scans once, injects a gadolinium-based contrast agent, waits a few minutes, and scans again. That typically adds 15 to 30 minutes, and it is the difference between a 45-minute visit and a 75-minute one.
- More than one area. A brain and full spine study is really three or four scans in one appointment, and the time adds up.
- Movement. You must hold still, because movement blurs the images. If you cough, shift a leg, or swallow at the wrong moment during a sequence, that sequence is often repeated, and five minutes becomes ten.
- Detail. A scan looking for something subtle needs more sequences, thinner slices, and longer acquisition times than a routine follow-up.
- Your body and the machine. Larger patients and certain implants need adjustments to positioning and protocol, and older or lower-field scanners run slower than newer ones.
What the appointment looks like
Arrival and screening (15-30 minutes). You check in, fill out a safety questionnaire about metal implants, pacemakers, tattoos, and prior surgeries, and change into a gown. Everything metal stays outside the scan room: jewelry, watches, phones, and clothing with metal fasteners. If you have kidney disease or reduced kidney function, tell the team beforehand, because the contrast material is cleared by the kidneys and a recent blood test may be checked.
Positioning (5-10 minutes). You lie on a padded motorized table that slides into the scanner. For brain, neck, and upper spine scans you go in head-first; for lower body scans you may go in feet-first. The team gives you earplugs or headphones, because the scanner is loud, and a call button or squeeze ball so you can reach them at any time. A microphone and speaker connect you to the control room throughout.
The scan (15-90 minutes). The table glides into the bore, and the rhythm begins: a warning from the intercom, a burst of loud knocking or buzzing lasting a few minutes, a pause, another sequence. You will be asked to hold still and, for chest and abdomen scans, to hold your breath at set moments. If contrast is ordered, it is injected partway through, usually through an IV placed before the scan.
Afterward (a few minutes). The table slides out, you change back, and you can usually leave right away and drive yourself home, unless you were given a sedative. There is no recovery time for a standard MRI.
How to make it go faster and easier
- Arrive early with paperwork done. A completed safety form and an on-time arrival keep the schedule on track.
- Hold still. It is the single biggest thing you control. A clean first pass is always faster than a retake.
- Ask about music or a mirror. Many centers offer music through headphones or a mirror that lets you see out of the scanner, which helps with claustrophobia.
- Tell the team about anxiety. If enclosed spaces worry you, say so when you book. Options include an open scanner, a wider-bore machine, or a mild sedative arranged in advance with your doctor.
- Use the bathroom first. A full bladder during a 45-minute scan is a distraction you do not need.
- Wear metal-free clothing. Sweatpants and a plain shirt can save you a gown change at some centers.
For most scans of the brain, spine, joints, and extremities, you can eat and drink normally beforehand. Abdomen and pelvis scans sometimes require fasting, so follow the instructions on your appointment letter.
This page is general information about MRI timing, not medical advice. Your doctor and the imaging center set the protocol for your scan; follow their instructions.
Frequently asked questions
How long does a brain MRI take?
A brain MRI typically takes 30 to 45 minutes in the scanner, and up to 60 minutes with contrast. A simple follow-up scan can be as short as 15 to 20 minutes.
How long does an MRI with contrast take?
Contrast usually adds 15 to 30 minutes, because the team scans once, injects the contrast agent, and scans again. An order for with and without contrast can turn a 45-minute visit into a 75-minute one.
Why does an MRI take so long?
An MRI builds images one sequence at a time, and each sequence takes a few minutes. The scanner can only go as fast as the body magnetizes, and detailed images need more sequences. Movement that forces a retake adds time too.
Can I eat before an MRI?
For most scans of the brain, spine, joints, and extremities, yes, you can eat and drink normally. Abdomen and pelvis scans sometimes require fasting, so follow your appointment letter.
How long does the whole MRI appointment take?
Plan for about 90 minutes to two hours door to door for a routine scan, including check-in, safety screening, changing, and the scan itself. Complex studies with contrast take longer.
Sources
- Mayo Clinic — MRI — an MRI exam can last 15 minutes to more than an hour; people are typically in the scanner 30 to 50 minutes; movement blurs images.
- Mayo Clinic News Network — Q and A: 5 questions about MRI — routine appointment time at Mayo Clinic is 45 minutes; some exams take as long as four hours; scanner strength 1.5T, 3T and 7T.
- MRI.md — MRI FAQ — most scans 30-60 minutes; brain MRI 30-45 minutes; plan 90 minutes to 2 hours total; eating normally before most scans.