HOMES Rebate: Whole-Home Rebates and How They Work
Most energy rebates pay for a single piece of equipment — a heat pump, a water heater, insulation. The HOMES program is different: it pays for a whole-home upgrade, and the amount depends on how much energy the upgrade actually saves. The more energy saved, the larger the rebate. That design rewards the most effective projects, but it also makes the program more complicated than a simple equipment rebate — the savings have to be measured or modeled, and the rebate is administered by each state in its own way.

The short answer to the question most homeowners ask — how much can I get — is that it depends on the measured or modeled energy savings, on your household income, and on your state's program design. This guide explains how HOMES works, the two ways savings are measured, who qualifies, and how to find out whether the program is open in your state. Use the HOMES Rebate Estimator: Whole-Home Energy Savings Rebate on this site to work out your own figures.
What HOMES is
HOMES — the Home Efficiency Rebates program — was created by the Inflation Reduction Act and is funded federally but run by the states. Each state designs its own program within federal guidelines, applies to the Department of Energy for approval, and then opens it to residents. The rebate is for energy efficiency retrofits to a home: insulation, air sealing, new windows, efficient heating and cooling, and other measures that reduce energy use. The work must be done by a qualified contractor, and the home's energy performance is assessed before and after.
The program covers both single-family homes and multifamily buildings, and it is open to homeowners and, in some states, to landlords who upgrade rental properties. The rebate is paid after the work is complete and the savings are verified, not in advance — which means the homeowner or the contractor funds the work first and is reimbursed afterwards, unless the state has arranged another payment method.
How the rebate is calculated
The rebate is tied to the percentage of energy saved. There are two paths. The modeled savings path estimates the savings using an approved energy model of the home, based on the measures installed. The measured savings path uses actual energy bills before and after the upgrade, with an adjustment for weather, and pays based on the savings that actually occurred over a period of time. The modeled path is more common, because it pays sooner; the measured path can pay more if the savings turn out to be larger than modeled, but it requires patience and data collection. Use the HOMES Rebate Estimator: Whole-Home Energy Savings Rebate on this site to work out your own figures.
In both paths, the rebate is larger for larger savings, and it is capped per home. Income matters too: households below a percentage of the area median income can receive a larger rebate, and in some states the lowest-income households can have the full cost of the project covered. The exact bands and caps are set by each state within the federal framework, so the same project can earn a different rebate in two neighboring states.
Who qualifies and what work counts
Eligibility starts with the home: it must be in a state where the program is open, and the work must be an energy efficiency retrofit that the state's program covers. The homeowner's income determines the rebate band, and the program may require an energy audit before the work begins. The contractor must meet the state's qualification requirements, which can include specific training or certification. Work done before the program opens in your state, or by a contractor who is not qualified under the program, may not be eligible.
The measures that count are the ones that reduce energy use: insulation and air sealing, efficient heating and cooling equipment, heat pump water heaters, efficient windows and doors, and electrical upgrades needed to support the efficiency measures. The program does not pay for cosmetic work, for repairs unrelated to energy, or for new construction. Your state's program guide lists the eligible measures and the documentation required.
How to find out if HOMES is open in your state
Check your state energy office's website for the HOMES program page. States have opened their programs on different schedules, and some are still in the application or design phase. The Department of Energy publishes a tracker showing which states have approved programs and which are open to applications. If your state has not yet opened, you can sign up for updates from the state energy office and check whether other programs — utility rebates, the weatherization program, or state efficiency programs — can help in the meantime.
When the program is open, the process is usually: an energy audit, a scope of work from a qualified contractor, an application or reservation, the work itself, and then verification and payment. Keep every document — the audit, the contract, the invoices, the post-work verification — because the rebate depends on proving the work and the savings.
Common mistakes
The most common mistake is starting work before checking whether the program is open and whether pre-approval is required. The second is using a contractor who is not qualified under the program. The third is assuming the rebate will cover the whole cost — it is capped, and the cap may be well below the project cost. The fourth is not keeping the documentation the program requires. And the fifth is confusing HOMES with the separate home electrification rebates, which pay for specific equipment rather than for measured savings, and which have different rules.
The HOMES rebate program pays for whole-home energy savings, and a whole home energy rebate is worked out from the energy saved, not from the price of the equipment. A homes energy rebate under this program is different from the HEEHR rebate, and IRA home energy rebates is the umbrella term for both programs under the Inflation Reduction Act. The modeled savings, the contractor’s paperwork, and the state program’s rules are the three things that decide what you can claim.
Frequently asked questions
How is a HOMES rebate different from a heat pump rebate?
A heat pump rebate pays for a specific piece of equipment. A HOMES rebate pays for a whole-home upgrade, and the amount depends on how much energy the upgrade saves — measured or modeled.
Do I get the rebate before or after the work?
Usually after the work is complete and the savings are verified: the homeowner or contractor funds the work first and is reimbursed afterwards, unless the state has arranged another payment method.
Is HOMES open in every state?
No — states open their programs on different schedules. Check your state energy office and the Department of Energy's tracker for the current status in your state.
Can landlords claim HOMES rebates?
In some states, yes — for upgrades to rental properties. The rules vary by state, and the rebate may be lower for rental properties than for owner-occupied homes.
Sources
- U.S. Department of Energy — Home Efficiency Rebates (HOMES) program, energy.gov.
- U.S. Department of Energy — Home Energy Rebates Program — state home energy rebates, including HOMES and electrification rebates.