Community Solar for Renters: How to Save on Electricity Without Rooftop Panels

If you rent, solar power has always had a simple problem: the panels go on a roof you do not own. Community solar solves that problem by moving the panels somewhere else. You subscribe to a share of a solar farm built in your area, the farm feeds electricity into the grid, and your utility applies credits to your bill for your share of what it produced. Nothing is installed on your home, nothing is drilled into your landlord's roof, and the savings show up as a lower electricity bill.

Rows of solar panels at a community solar farm
Photo by Oscar Taylor, CC BY-SA 2.0

That makes community solar one of the few clean-energy options built for renters from the start. It is not a discount code or a gadget. It is a subscription to a real solar project, and whether it saves you money depends on the program in your state, the size of your subscription, and the terms you sign. This guide explains how it works, what it can save, and what to check before you subscribe.

What community solar is

Community solar — sometimes called shared solar or a solar garden — is a program that lets many people share the electricity produced by a single solar farm. Instead of installing panels on your own roof, you subscribe to a portion of a larger project built somewhere in your utility's service area. The farm generates power, the power goes onto the grid, and your utility credits your bill for your share.

The idea exists because rooftop solar excludes most people. Renters cannot install panels on a building they do not own. Homeowners with shaded roofs, old roofs or roofs that face the wrong way cannot install them either. And even where installation is possible, the upfront cost puts it out of reach. Community solar removes all three barriers at once: no roof needed, no installation, and usually no upfront cost to join.

As of 2026, community solar projects operate in more than 40 states plus the District of Columbia, with cumulative installed capacity approaching 10 gigawatts nationwide. But availability is uneven. The strongest markets are states that wrote laws for it — Minnesota, New York and Massachusetts among them — while other states have only small pilot programs or nothing at all. Whether you can subscribe depends on your state and on your utility, because the credits flow through your utility bill.

How a subscription works

Signing up follows the same pattern in most programs. First, you find a community solar project or provider serving your utility's area and subscribe to a share sized to offset some or all of your monthly electricity use — often around 90 percent of your historical consumption. Second, the solar farm generates electricity and feeds it into the grid. Third, your utility applies a bill credit to your account for your share of the generation. Fourth, you pay the solar provider a subscription fee for those credits, and the fee is set below the value of the credit. The difference between the credit and the fee is your saving.

That last step is the whole business model. In a well-designed program the credit is always worth more than the fee, so you save money every month the farm is producing. Some programs use consolidated billing, where the subscription fee and the bill credit appear together on your regular utility bill, so you never see a separate invoice from the solar company. Credits usually start reducing your bill about two to three billing cycles after enrollment, once the project is live and your subscription is active.

Your credits vary month to month, because they depend on how much energy the farm produces. A sunny summer month produces larger credits than a cloudy winter month, and in northern states winter production drops noticeably. That is normal, and it is why savings are usually quoted as an annual average rather than a monthly promise.

Why community solar fits renters

For a renter, the fit is practical. Subscribing does not require your landlord's permission, because you are buying electricity, not installing anything on someone else's property. There is no equipment in your apartment, no roof work, and no change to the building at all. Your only requirements are an active electricity account with the utility the solar farm feeds into, and a home inside that utility's service area — you cannot subscribe to a project in Minnesota if you live in Texas.

Moving is the one thing to plan for. In some programs a subscription is transferable within the same utility's territory, so a move across town is no problem, while a move to a different utility's area ends the subscription. Ask the provider what happens if you move before you sign, and get the answer in writing.

Low-income programs deserve a special mention. Many states reserve a share of each solar garden's capacity for income-eligible households — Minnesota, for example, requires at least 30 percent of each community solar garden's capacity to be reserved for households at or below 150 percent of area median income — and these programs often waive credit checks and guarantee savings. If you receive energy assistance or another low-income benefit, ask whether there is an income-qualified tier, because it usually comes with better terms than the standard offer.

How much you can save

Community solar will not cut your electricity bill in half. What it reliably does is shave a meaningful percentage off it with no effort on your part. Typical savings run 5 to 15 percent on your electricity bill, depending on your location, your utility's rates and the discount your program offers. On a $100 monthly bill that is $5 to $15 a month; on a $250 bill it is $12.50 to $37.50. Over a year, savings commonly fall between $60 and $450, depending on bill size and the discount rate.

Some programs advertise higher figures, up to 20 or 25 percent, but those depend heavily on local conditions and should be checked against the actual contract. The most useful number a provider can give you is not a percentage but a dollar estimate based on your own past bills, and a provider that will not do that math for you is a provider to be careful with.

Minnesota offers the clearest example of guaranteed savings for lower-income households. Under the state's Low and Moderate-Income Accessible Community Solar Garden Program, overseen by the Minnesota Department of Commerce, the program requires that a household's subscription costs never exceed the value of its bill credit — the credit is always worth more than the fee. The program's published guidance, from community action agencies that enroll households, says the average household is expected to save $250 a year. That $250 is one program's estimate for its income-qualified households in Minnesota, not a national average, and it reflects Minnesota's rules, Minnesota's sunshine and Minnesota's electricity rates. It is useful as proof that guaranteed savings are possible, not as a promise of what you will save somewhere else.

Where community solar is available

Start with your utility. Call or check its website for a community solar page, or search for your state's energy office and its community solar information. Minnesota's program is the oldest and largest, created in 2013 and now one of the biggest community solar markets in the country, with more than 800 megawatts of active capacity. New York is the other large market, and Massachusetts and several other states have substantial programs. In states without a community solar law, utilities sometimes run their own subscription programs — Florida's SolarTogether is one example — but the terms and the savings differ from the state-law programs.

When you find a program, check four things before anything else: that it serves your utility and your address, that there is no upfront fee or enrollment fee, that the contract states the discount or the guaranteed saving clearly, and what happens if you move or want to cancel. A legitimate program answers all four in plain writing. One that will not put the savings in writing is not one to join.

How to sign up, and what to check in the contract

The signup itself is usually quick — an online form, your utility account number, and your recent electricity usage so the subscription can be sized to your home. Some providers run a credit check, often looking for a score around 650, but many do not, and low-income programs typically waive the requirement. Minnesota's income-qualified program, for example, has no credit checks, no enrollment fees and no exit fees.

Read the contract before you sign it, and look for these terms. The discount rate or the guaranteed saving: the contract should state what you save, not just that you will save something. The length of the term and the exit fee: some subscriptions run for years, and an early exit fee can wipe out a year of savings. Whether the subscription fee can rise: a fee tied to the bill credit is safer than a fee that rises on its own schedule. What happens if the project is delayed or stops producing: you should not be paying a fee for credits you are not receiving. And whether the savings are guaranteed, as they are for income-qualified households in Minnesota, or merely estimated.

Be skeptical of door-to-door and telemarketing offers. A genuine community solar provider does not need to pressure you, does not ask for your Social Security number over the phone, and does not demand a payment to "reserve" a subscription. If an offer promises to eliminate your electricity bill entirely, it is misrepresenting the product — community solar trims the bill, it does not erase it.

Balcony solar: the plug-in option, and why its legality varies

Community solar is not the only option for renters. Plug-in or balcony solar kits — one or two panels that stand on a balcony or lean against a railing and plug into a standard outdoor outlet — have become popular, and they work differently: they generate power for your own home directly, rather than earning bill credits from a distant farm.

The legal picture is changing fast and varies by state. Utah was the first state to pass a plug-in solar law, in 2025, and several states have followed since, commonly capping systems at 1,200 watts per home and treating the kit like an appliance rather than a power plant, with no interconnection agreement or permit required. In most other states, plugging a panel into a standard outlet may still violate your utility's interconnection rules, and more than 30 states have bills in progress that have not yet become law.

That means two checks before you buy a kit. First, check your state's rules and your utility's interconnection requirements — a system that backfeeds power to the grid without approval can breach your utility agreement. Second, get your landlord's permission in writing. Even in states with plug-in solar laws, a lease or building rules may control what you attach to a balcony, and a few newer laws limit a landlord's ability to ban qualifying devices — New Jersey and Virginia have moved in that direction — but in most places the lease still decides. Buy only equipment certified by a nationally recognized testing laboratory, and never use a kit that keeps feeding power during an outage; certified inverters shut off automatically when the grid goes down, which protects line workers.

What community solar will not do

It helps to be clear about the limits. Community solar will not make your electricity free, and it will not protect you from a rate increase — it trims a percentage off whatever the bill would have been. It will not help if your utility does not participate, and it is not the same as rooftop solar: you do not own panels, you cannot claim the federal rooftop solar tax credit for a subscription, and you do not get net metering. Winter credits will be smaller than summer ones, and a move outside your utility's territory will end the subscription.

None of that makes it a bad deal. It makes it a modest, reliable one: a small saving every month, no installation, no upfront cost, and no permission needed from a landlord. For a renter, that combination is hard to find anywhere else in energy.

Frequently asked questions

Do I need my landlord's permission to join community solar?

No, not for a subscription — you are buying electricity from a solar farm, not installing anything on the building. You do need your landlord's permission in writing for balcony or plug-in solar panels, because those attach to the property.

Will joining community solar affect my energy assistance?

In Minnesota's income-qualified program, participating will not affect your eligibility for energy assistance in the future. Rules differ by state and program, so confirm with the program or your local Community Action Agency before you enroll.

What happens if I move?

It depends on the program. In many programs a subscription is transferable within the same utility's service area, so a move across town is fine. Moving to a different utility's area usually ends the subscription. Ask the provider before you sign.

Is there a credit check?

It varies. Some providers require a minimum credit score, often around 650. Many do not check credit at all, and low-income programs typically waive the requirement — Minnesota's income-qualified program has no credit checks.

How long before I see savings on my bill?

Credits usually start reducing your bill about two to three billing cycles after enrollment, once the project is live. Savings then vary by season, with larger credits in sunnier months.

Sources

  • Minnesota Department of Commerce — Low and Moderate-Income Accessible Community Solar Garden Program: income-eligible households, guaranteed savings, subscription costs cannot exceed bill credits.
  • Semcac Community Solar FAQs — Minnesota Community Solar Garden Program: income-qualified households guaranteed savings; average household expected to save $250 annually.
  • Community Action Partnership of Hennepin County — Minnesota Community Solar Garden Program: income-eligible families save an average of $250 the first year; participation does not affect future energy assistance eligibility.
  • U.S. Department of Energy — community solar basics: shared solar farms, bill credits, no rooftop installation required.

Related guides